Configuration tools, debugging software and selection resources from Xinlong IoT — all free to download. Covering batch barcode-device setup, production-line scan error-proofing, serial data integration, AI module debugging and Ethernet module networking.
Built on the Xinlong IoT "Command Set 2508" DataMatrix configuration-code system — 438 setting commands in 8 categories. Pick a setting and the configuration barcode is generated instantly — scan once to configure devices in batch, no software or PC required.
Barcode device configuration for retail, logistics, warehousing and supermarkets. Clear interface, scan and go.
In-depth configuration for smart manufacturing, production-line automation and industrial inspection — fine-tune reading parameters item by item.
Combined commercial and industrial settings — all 438 commands, portable, no installation.
Check before configuring: full descriptions of all 438 commands with hex ASCII values, in 8 categories.
Windows software bundled with our devices — covering production-line error-proofing, serial integration, module debugging and Ethernet networking.
Auto-compares serial-port scans with the master barcode — big-screen pass/fail, voice announcement and tri-colour alarm light to catch wrong codes on the spot.
Types data from RS232 scanners or instruments straight into the active window — no POS or ERP changes needed.
Connect, tune and configure HiSilicon-based AI scan modules over USB / HID. Unzip and run.
The complete toolkit for putting serial scanners on the network: LAN device discovery, serial & TCP configuration, test program included.
Not sure which model to choose? Compare them in the spec table — device setting codes and module command manuals are also downloadable.
All 28 models compared side by side: sensor, reading precision, depth of field, interfaces, dimensions and protection rating — each model links straight to its datasheet.
Complete setting manual for F31 / F41 / F53 industrial scanners — 84 pages covering every function and configuration step.
Serial commands and setting codes for embedded scan modules V1.0.0, with command tables and communication protocol.
Datasheets, debugging software, user guides and setting-code tables for the full range — 32 downloads with category filters.
Difficult reads — reflective, damaged, tiny or DPM codes — or need interface and feature customisation? Send us a sample and your working conditions. Or email lixuan@xinlongiot.com.